I ACTUALLY GOT THIS FROM A MOVIE, AND HAVE TRIED IT [IT WORKS!!!]. OK YOU
MAY HAVE TO DO THIS A COUPLE TIMES BEFORE YOU GET IT. HERES WHAT YOU NEED:
A FEW LIGHT BULBS
TORCH [ONE THAT WILL MELT GLASS, RADIO SHACK SINGLE CYLENDER MODEL WILL DO]
SOME GASOLINE
SOME LIQUID SOAP
SOME EPOXY GLUE
HERES WHAT YOU DO:
1) MAKE A HOLE IN THE LIGHT BULB LIKE THIS:
*
---
: :
MAKE HOLE HERE : : OR HERE.
\ / \ /
/ \
: :
: :
\---/
NOT HERE!!!!!
2) MAKING THE HOLE, LIKE IN THE DIAGRAM [DONT MAKE IT ON THE BOTTOM, BECAUSE
IF THE SEAL YOU WILL MAKE SHOULD BREAK, THE PERSON/ROOM YOU WANT TO ELIMINATE
WILL NOTICE THE HOLE [AND THE GASOLINE ON THE FLOOR!!!] WHEREAS THE IF ITS ON
TOP IT WILL STILL WORK...
3) NOW CAREFULLY FILL THE LIGHT BULB ABOUT HALF FULL WITH GAS, AND THEN THE
REST WITH SOAP [HOLD ON ANGLE IF YOU HAVE TO]. NOW EPOXY THE HOLE SHUT, AND
SCREW IT IN...